Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Sunrise Manor?
Gate repair in Sunrise Manor typically runs $150 to $650 for mechanical fixes like hinges, latches, rollers and bent frames, while electric and automated gate repairs usually fall between $250 and $1,400 depending on the operator and access control involved. A single failed component such as a keypad, sensor or limit switch often lands at the low end, while a dead motor or control board pushes toward the top. Every price we quote is set per job by a written estimate after we look at your gate, and the estimate itself is free.
That range covers both manual and motorized systems, and it holds across the operator brands common on residential and commercial gates around Sunrise Manor. If your gate has stopped moving, the fastest way to get a real number is to call (844) 435-3018. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to diagnose it.
Key Takeaways
- Mechanical gate repair in Sunrise Manor: roughly $150 to $650.
- Electric and automated gate repair: roughly $250 to $1,400, driven mostly by the operator and control hardware.
- New gate installation is priced separately and depends on span, material and whether automation is included.
- Estimates are free, and the written estimate sets the final price.
- Our technicians have up to 14 years of experience and work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment.
Gate Repair Cost Breakdown (2026)
Here’s how the line items usually break out for the Sunrise Manor market in 2026. These are typical ranges, not quotes. The gate in front of you and the operator bolted to it decide where you land inside each range.
| Repair item | Typical cost range | What drives the number |
|---|---|---|
| Hinge, latch or roller replacement | $150 – $350 | Number of hinges, gate weight, whether the frame is bent |
| Sagging or dragging gate realignment | $200 – $500 | Post condition, footing, gate span and material |
| Track or guide repair on slide gates | $250 – $700 | Track length, whether the gate came off the track, ground settling |
| Operator motor or gearbox replacement | $450 – $1,200 | Operator brand and model, gate weight, swing vs. slide |
| Control board or receiver replacement | $300 – $800 | Board availability, brand platform, access control integration |
| Safety sensor or photo-eye repair | $200 – $450 | Wiring runs, sensor type, whether the operator is compatible |
| Keypad, remote or entry system repair | $150 – $500 | Wired vs. wireless, number of remotes or codes to program |
| Wiring and power fault diagnosis and repair | $250 – $900 | Length of the run, conduit condition, whether the fault is underground |
| Battery backup replacement | $200 – $450 | Battery type, operator model |
Two things move the price most: the operator and the gate itself. A heavy slide gate on a commercial property takes more labor to move, support and realign than a residential swing gate, and a complex DoorKing access control setup takes more diagnostic time than a simple Linear remote receiver. Brand also matters. On a common platform like LiftMaster or Mighty Mule, parts are straightforward to source. On older or less common operators, the cost of tracking down the right board or motor can push a repair toward the top of its range. We diagnose across all of these platforms, so the recommendation follows your system rather than a product we’d rather sell you.
Where it’s worth being honest: sometimes a repair isn’t the right call. If the operator is failing on multiple fronts at once, or the gate frame is rusted through and out of square, replacing the system costs less over a couple of years than chasing one failure after another. We’ll tell you which side of that line you’re on before you commit.
What Affects Gate Repair Pricing in Sunrise Manor
Sunrise Manor sits in the Las Vegas Valley, and the desert conditions here shape how gates fail and what it costs to put them right. A few factors come up again and again.
- Heat and dust on the operator. Summer temperatures in the valley push gate motors, control boards and batteries hard. Heat ages electronic components faster, and fine desert dust works into gearboxes and slide tracks. A motor that runs fine in a cooler climate can fail years earlier here, and that’s typically the single biggest line item on an electric gate repair.
- Ground movement and post settling. Valley soil shifts with moisture and drying cycles, and posts that were set perfectly can lean or settle over time. A settled post makes a gate sag or drag, and realigning it means working on the gate and the footing together, not just tightening a hinge.
- Gate material and weight. Wrought iron and steel gates weigh far more than aluminum or vinyl, and weight drives hinge wear, operator sizing and how much labor a repair takes. Heavier gates cost more to repair across the board.
- Operator brand and age. Parts for current models from the brands we service are easy to source. Older operators, or discontinued models, can mean longer diagnosis and higher part cost. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, so most systems a Sunrise Manor property already has are within reach.
- Swing vs. slide vs. access control. A residential swing gate with a remote is a simpler job than a slide gate with a keypad, intercom, loop detector and safety sensors. The more access hardware on the gate, the more there is to diagnose and the higher the labor.
- Wiring and power runs. If the fault is in the wiring rather than the operator, the cost depends on how far the run is and whether the conduit is intact. Underground faults take more time to trace.
What we don’t do is pad the number. A free estimate means we look at the gate, tell you what’s failed, and give you a written price for the fix. That’s the whole exchange.
Repair or Replace: How to Decide
The honest answer usually comes down to the operator and the frame. If the gate structure is sound and the operator is a current model with parts available, repair wins nearly every time. If the operator is failing in several places and the gate frame is out of square, replacement is often the smarter spend.
- Repair makes sense when: one component has failed, the operator is a current model, the gate frame is solid, and the fix restores full function.
- Replacement makes sense when: the operator is old and discontinued, multiple parts are failing at once, the gate frame is bent or rusted through, or the system can no longer be made safe to operate.
We don’t push one over the other. Electric gate repair is a big part of what we do, and so is new gate installation, so we can give you a straight comparison for your specific gate. That’s the whole point of a gate-only specialist: we aren’t a fence company or a handyman squeezing a gate in between other jobs. Gates are the only thing we work on, so the call gets handled by someone whose skill set is entirely gate-specific.
How to Save on Gate Repair
There’s no magic to keeping a gate repair bill down. Most of it comes down to acting early, knowing your operator, and getting a written number before anyone touches the gate.
- Fix small failures before they cascade. A dragging gate wears out hinges, motors and tracks in sequence. Catching the first sign, like a gate that hesitates or scrapes, keeps the repair at the low end of the range instead of replacing an operator later.
- Know your operator. The brand and model matter when a part is needed. If you have the manual or a label on the operator unit, keep it handy. It shortens diagnosis and keeps the estimate tight.
- Get a written estimate first. Any reputable gate company should look at the gate and give you a written price before work begins. Our estimates are free, and the written estimate sets the final price. Call (844) 435-3018 and we’ll set one up.
- Don’t let a safety sensor stay broken. A gate that reverses on contact and stops for obstructions is doing its job. A sensor that’s failed is a safety issue and a liability, and it’s one of the cheaper items on the list to fix.
- Ask whether repair or replace is cheaper. For a gate where the operator is on its last legs, getting a comparison up front saves you from spending on a repair that won’t hold.
If you’re not sure whether your gate needs gate repair or replacement, a diagnostic visit is the fastest way to find out. It costs nothing to ask.
When Should You Call for Gate Repair?
Any gate that has stopped moving safely is a call-now item, especially an electric one. The risks on a gate are real: wiring and power at the operator, heavy panels that can crush, and slide gates that come off the track. A trained technician should handle all three. Please don’t try to free a stuck gate, bypass a safety sensor, or open an operator housing yourself, because the power and the weight are both more dangerous than they look.
Call us when:
- The gate won’t open, won’t close, or moves partway and stops.
- The operator runs but the gate doesn’t move, or you hear grinding or clicking from the motor.
- Safety sensors or photo-eyes have stopped working, or the gate no longer reverses on contact.
- A keypad, remote, intercom or entry system has failed.
- A slide gate has come off its track, or a swing gate is dragging on the ground.
- The gate is leaning, sagging or out of alignment.
We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. We’re closed on Saturday. If a call comes in outside dispatch hours, it gets booked into the next opening, Sunday through Friday, 7am to 7pm. Same-day service is often possible for a gate that’s failed.
What’s Included in a Gate Repair Estimate
A proper estimate for a gate repair isn’t just a number for a part. It should cover what was found, what will be done, and what it will cost, in writing, before work starts. Here’s what that looks like with us.
- On-site diagnosis. We look at the gate, the operator, the wiring, the sensors and the access hardware to find the actual failure, not a symptom.
- A written price per job. The written estimate sets the final price. There’s no surprise add-on after the fact.
- A repair-or-replace recommendation where it applies. If replacing the operator or the gate is the better long-term call, you’ll hear that with a price to compare.
- Repair across brands. If your operator is a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule system, we’re equipped to diagnose and repair it.
Our technicians have up to 14 years of experience, and the full range of gate services sits under one roof: mechanical repair, electric and automated repair, and new installation. That matters when a repair turns out to need a replacement part or a new install, because you aren’t sent to a second contractor to finish the job.
FAQs – Gate Repair Cost
How much does gate repair cost in Sunrise Manor?
Most gate repairs in Sunrise Manor run between $150 and $650 for mechanical work, and $250 to $1,400 for electric and automated repairs. The final price depends on the operator, the gate’s weight and condition, and which components have failed. Call (844) 435-3018 for a free written estimate.
Is it cheaper to repair or replace an electric gate?
Repair is usually cheaper when one component has failed and the gate frame is sound, while replacement is the better spend when the operator is old, several parts are failing at once, or the frame is bent or rusted. A written estimate that compares both is the only reliable way to know for your gate. Call (844) 435-3018 and we’ll give you the comparison.
How much does an electric gate motor or operator replacement cost in Sunrise Manor?
An operator motor or gearbox replacement typically runs $450 to $1,200, and a control board or receiver runs $300 to $800. The brand, the gate’s weight, and whether the gate is a swing or slide system all move the number. Call (844) 435-3018 for an exact quote, and the estimate is free.
Can you come today for a gate repair in Sunrise Manor?
Same-day service is often possible for a gate that has stopped working, and we dispatch Sunday through Friday, 7am to 7pm. We’re closed on Saturday, and a call outside dispatch hours is booked into the next opening. Call (844) 435-3018. We answer 24/7.
How much does it cost to fix a gate that has come off its track?
Getting a slide gate back on its track and repairing the guide typically runs $250 to $700, depending on the track length and whether the gate needs realigning after it’s back in place. A gate that’s come off the track is a heavy-panel hazard, so leave it to a technician. Call (844) 435-3018 for a free estimate.
Get a Free Gate Repair Estimate in Sunrise Manor
Sunrise Manor homeowners and property managers call us because we work on the operator they already own, and we tell them straight whether a gate needs fixing or replacing. We service gate systems from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we handle mechanical repair, electric and automated repair, and new installation. Whether it’s a gate that won’t open or a full system that needs a specialist, we’re set up for it.
Call (844) 435-3018 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also start with our Gate Repair Sunrise Manor page to see the full range of what we handle. When your gate needs attention, one call gets a technician on it.
Pricing reflects the Sunrise Manor market as of 2026. Gate Repair Sunrise Manor offers free estimates – call (844) 435-3018.
Written by the team at Gate Repair Sunrise Manor.
What Our Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Allen Nguyen"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Mark Novak"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Steve Barrett