Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Sunrise Manor?
Gate installation in Sunrise Manor typically costs $1,800 to $3,200 for a manual swing gate and $3,500 to $7,500 for an automated swing or slide gate with a single operator. A basic driveway gate with no automation usually lands between $1,200 and $2,400, while a full automated slide gate with access control runs $5,500 to $11,000. The written estimate you get after an on-site look sets the final price, and that estimate is free.
Those ranges are wide for a reason. A gate is one part metalwork, one part concrete, and one part electrical work if it moves on its own. What you pay in Sunrise Manor depends on the width of the opening, whether the ground is already prepared, and how much operator and access-control hardware goes on the gate. We work on the nine major gate and operator brands customers already own – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so the brand of your operator is never a reason you get pushed toward something else.
Key Takeaways
- Manual swing gate installation in Sunrise Manor: roughly $1,800 to $3,200.
- Automated swing gate with one operator: roughly $3,500 to $7,000.
- Automated slide gate with access control: roughly $5,500 to $11,000.
- Gate operators, keypads, loops and remotes are separate line items from the gate itself.
- Ground conditions and concrete set the pace of a Sunrise Manor install more than anything else.
Gate Installation Cost Breakdown (2026)
Here’s how a gate installation in Sunrise Manor breaks down by line item. These are typical ranges for the local market in 2026, not exact quotes. Your written estimate after we see the site is the number that counts.
| Line Item | Typical Range (Sunrise Manor, 2026) |
|---|---|
| Manual swing gate, single leaf, installed | $1,800 – $3,200 |
| Manual double swing gate, installed | $2,800 – $4,800 |
| Slide gate, manual, installed | $3,200 – $5,500 |
| Automated swing gate, single leaf, one operator | $3,500 – $7,000 |
| Automated slide gate, single operator | $4,500 – $8,500 |
| Automated slide gate with access control (keypad, loop, remotes) | $5,500 – $11,000 |
| Concrete pads and post footings | $400 – $1,400 |
| Operator and access hardware (sold separately from gate) | $900 – $2,800 depending on brand and features |
| Low-voltage wiring to the operator | $300 – $1,200 depending on distance |
| Removal and haul-away of an old gate | $200 – $600 |
What pushes a Sunrise Manor gate installation toward the top of those ranges? Heavy steel or decorative metal runs higher than a simple tube-steel frame. A wider opening means larger panels, more material, and usually a heavier operator to move them. Sloped or unlevel ground adds concrete and fabrication work. And a slide gate needs a clear run path and a level track surface, which is often where a Sunrise Manor yard surprises people.
What keeps the price down: a prepared, level opening; a standard-sized single-leaf swing gate; an operator you already own that’s in good working order; and reusing existing concrete pads where they’re sound. If the ground is already flat and the posts are already set, the install moves faster and costs less.
What Affects Gate Installation Pricing in Sunrise Manor
Six factors move the number on a gate installation more than any other. We look at all of them during the on-site estimate, so you know before you commit what’s driving your figure.
- Ground and soil conditions. Desert ground around Sunrise Manor can be hard-packed and rocky, which slows digging for post footings. Posts go to proper footing depth regardless, and rocky soil can mean more time and more concrete than a soft-soil yard.
- Gate width and material. A 12-foot single swing in tube steel costs less than a 20-foot double in decorative metal. The wider and heavier the gate, the more material, the sturdier the posts, and the stronger the operator has to be.
- Manual vs. automated. Automation is the single biggest jump in price. A manual gate is metal, hinges, posts, and concrete. Add an operator, a keypad, a safety loop, and the wiring that feeds it, and you’ve added several thousand dollars.
- Operator brand and type. Swing and slide operators price differently, and the brand you choose affects the hardware cost. Whether you want a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule operator, we work on all nine, so the recommendation follows your needs, not a product we’re pushing.
- Access control features. A basic remote is included with most automated setups. Adding a keypad, a vehicle loop, intercom, or phone-app control adds to the total. Property managers with multiple drivers tend to want more of these than a single-family homeowner.
- Site access and old gate removal. If an old gate or fence panel has to come out before the new one goes in, that’s removal and haul-away. Tight access or long wiring runs to the operator also add labor.
Why Gate Installation Prices Vary So Much
Two neighbors on the same street can get quotes that differ by a few thousand dollars, and it isn’t always a red flag. The gate itself is the obvious cost. What people underestimate is the concrete and the electrical side of an automated install. A slide gate needs a level track run and a clear path. An automated swing gate needs properly set posts that won’t shift, since a post that moves throws the operator out of alignment. When the groundwork is already done and the yard is flat, the install is straightforward. When the opening is sloped, the soil is rocky, or the wiring run is long, the labor goes up.
There’s also a difference between what a general handyman or fence company charges and what a gate-only specialist charges. A fence company treats the gate as an add-on to a fence job. We do only gates, so the measuring, the footing, the operator setup, and the safety check are all handled by someone whose entire skill set is gate-specific. That focus is part of why the quote holds together rather than ballooning once the work starts.
Manual Gate vs. Automated Gate: What’s the Price Difference?
A manual gate install in Sunrise Manor runs roughly $1,200 to $4,800 depending on width and material. An automated gate install runs roughly $3,500 to $11,000, with the jump coming from the operator, the access control, and the low-voltage wiring. The gate leaf itself is a similar cost; automation is what separates the two.
Whether automation is worth it comes down to how you use the gate. A side-yard pedestrian gate that gets opened by hand a few times a day doesn’t need an operator. A driveway gate that a household drives through several times a day, or that a property manager needs to control for multiple tenants, usually justifies the automation. If you already have an operator and are only replacing the gate, the install cost drops back toward manual territory plus the labor to re-mount the operator and reconnect it.
If your existing gate is automated but failing, it’s often not an installation question at all. A stuck gate, a gate that reverses on its own, or an operator that won’t respond is a repair issue, and we handle that too. Our gate repair Sunrise Manor service covers both mechanical and automated systems, so a broken gate and a new install are the same conversation.
What’s Included in a Gate Installation Estimate
A written estimate for a gate installation should spell out what’s being installed, what’s being removed, and what’s being wired. Here’s what we include when we quote a Sunrise Manor gate installation:
- Gate measurements and material spec, including width, height, and finish.
- Post footings to proper depth, with the concrete called out as a line item.
- Hinge and hardware installation for manual gates.
- Operator mounting and low-voltage wiring for automated gates.
- Access control hardware (keypad, loop, remotes) itemized separately.
- Removal and haul-away of any old gate or hardware.
- A safety check of the finished install, especially for automated gates.
The estimate is free, and it’s per job. There’s no separate trip charge or diagnostic fee baked in; the price you see is set by the written estimate after we’ve looked at the site. Call (844) 435-3018 to set one up.
Safety on Automated Gate Installations
An automated gate carries real hazards that a manual gate doesn’t. The operator’s wiring and power supply are the main one: mains voltage is involved, and getting that wrong is dangerous. Heavy gate panels can crush a person or an animal if the safety devices fail. A slide gate that comes off its track is another risk. This is not work to take on yourself, and it’s not work to hand to someone whose main trade is fences or general handyman repairs.
On any automated install we check the safety devices that stop the gate when something’s in the path, confirm the operator’s force settings, and verify the gate track and stops before we call the job done. If you already have an automated gate that’s acting up, don’t run it until it’s been looked at. Call us and we’ll take a look. We answer 24/7, with fast dispatch from 7am to 7pm.
How to Save on Gate Installation
Here’s where the price comes down without cutting corners on the gate itself.
- Get the estimate before you buy hardware. Buying an operator or keypad before anyone’s looked at the site is the most common way people overspend. We’ll tell you what your opening actually needs.
- Reuse sound existing infrastructure. If your posts and concrete pads are still solid, reusing them saves the footing and concrete line items. We’ll check them during the estimate.
- Choose a standard size. A standard-width single swing gate costs less than a custom double. If your opening allows it, a stock size keeps material and labor down.
- Keep the access control simple. A remote and a keypad cover most households. Add loops and intercoms only if you actually need them.
- Fix the operator before you replace the gate. If the gate is fine and the operator is failing, a repair can save you a full install. We’ll tell you which one is worth it.
None of that requires you to shop around for a cheaper number. The main saving is getting the right scope on the first estimate. Call (844) 435-3018 and we’ll walk your gate and give you a free written estimate.
Repair or Replace: Which Is Worth It on a Gate?
Repair is usually the better call when the gate leaf, posts, and operator are all sound and the problem is one part: a hinge, a roller, a control board, a sensor. Replacement wins when the gate frame is bent or rusted through, when the posts have shifted so far the operator can’t stay aligned, or when the operator is a type or brand that parts no longer support. We work on the nine brands listed earlier, so brand alone rarely forces a replacement.
If you’re not sure which side of that line your gate is on, that’s the exact question the on-site estimate answers. We’ll look at the gate, the posts, and the operator and tell you straight which is worth the money. Call (844) 435-3018 for a free estimate.
Do You Need a Permit for a Gate Installation in Sunrise Manor?
Most cities require a permit for a gate that involves electrical work, and many require one for any gate above a certain height. Sunrise Manor is in Clark County, and rules can vary, so the right move is to call your city’s building department and ask before you commit. We’ll flag anything on your site that typically triggers a permit during the estimate, and you’ll know what to check.
For automated gates, the electrical connection to the operator is the part that most often needs a permit and a licensed electrician. Ask about that specifically, and ask whether a post or footing inspection is required for your gate type.
Which Gate Brands Do We Install and Service?
We install and service gate equipment from nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the operators most Sunrise Manor homeowners and property managers already own, from a basic residential swing operator to a commercial slide system. If you have a brand not on that list, call and ask; a lot of it we can still work on.
Here’s what matters about brand coverage. When the person quoting your install only handles one brand, every recommendation lands on that brand. When they handle nine, the recommendation can follow your gate and your usage. A Ghost Controls operator makes sense for a simple residential driveway. A DoorKing or Elite setup fits a property manager running access control for multiple vehicles. We don’t sell you toward a preferred product. We diagnose across brands and tell you what fits.
That same breadth is what lets us handle your whole gate lifecycle. Repair, electric and automated repair, and new installation all sit under one roof, so you’re not sourcing a fence company for the gate and an electrician for the operator and a different outfit for the access control. It’s one call, any gate. You can read more about our services on the Sunrise Manor page.
FAQs – Gate Installation Cost
How much does gate installation cost in Sunrise Manor?
A manual swing gate install in Sunrise Manor typically costs $1,800 to $3,200, and an automated swing or slide gate with one operator runs $3,500 to $7,500. A full automated slide gate with access control runs $5,500 to $11,000. The written estimate sets the final price. Call (844) 435-3018 for a free estimate.
Is it cheaper to repair or replace a gate?
Repair is usually cheaper and the right call when the gate frame, posts, and operator are sound and only one part has failed – often a few hundred dollars versus thousands for a full install. Replacement makes sense when the frame is bent or the posts have shifted. Call (844) 435-3018 and we’ll tell you which is worth it.
How much does an automated gate operator add to the cost?
The operator and access hardware typically add $900 to $2,800 to an installation, on top of the gate itself, with installation labor adding more. That’s why an automated install usually runs $3,500 to $11,000 versus $1,200 to $4,800 for manual. Call (844) 435-3018 for an exact quote on your gate.
Can you install a gate the same day?
Same-day gate repair is often possible, but a full installation usually needs a site visit and a scheduled install day. We can dispatch a technician and get you a written estimate fast. Call (844) 435-3018. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do you install gates for property managers and commercial properties?
Yes. We service both residential and commercial gate configurations across a wide range of operator types, including access control for multiple drivers. Commercial slide gates and automated systems are a big part of what we handle. Call (844) 435-3018 for a free estimate.
What brands of gate operators do you install?
We install and service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians have up to 14 years of experience diagnosing and installing across those brands. Call (844) 435-3018 to talk through your gate.
Get a Free Gate Installation Estimate in Sunrise Manor
Gate installation in Sunrise Manor comes down to three things: the gate, the ground it sits on, and whether it’s automated. We quote all three in one written estimate, itemized, with no trip charge and no diagnostic fee. Our technicians have up to 14 years of experience and handle the nine brands above. Whether you’re starting from scratch or replacing an old gate, we’ll tell you which route is worth the money. Call (844) 435-3018 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Sunrise Manor market as of 2026. Gate Repair Sunrise Manor offers free estimates – call (844) 435-3018.
Written by the team at Gate Repair Sunrise Manor.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Brooke Parker"Quoted me over the phone, charged me that, left. Perfect."
- Erin Miller"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Alejandro Morales